So, get out the solder iron, some wire, a few USB ports and hack away. I would create an attached hub with a hole for the wires to come out, rather than the way these guys went about it. Good instructions though, just kind of crude cover in the end. I found the Netgear Wireless Digital music Player MP101 had what I was. Aug 27, 2018 netgear mp101 hack 8/27/2018 AAA applies arbitration rules for arbitration for disputes under these circumstances unless you are a person and use the Services for personal or personal purposes. In this case, AAA ban on arbitration (except for rules or procedures) will govern or approve collection actions). Jun 26, 2018 Netgear Mp101 Hack. Netgear Mp101 Hack 8,6/10 6938 votes. Hi, I am a newbie here, so please go easy on me. Before I posted here, I did a search on MP101 and got about.
In this tutorial, I'll show you how to connect the Arduino to the Bescor MP-101.
Note: Free android apps download for mobile. Please check for continuity with a multi-meter. The colors of the wires may be different.
update: 12-26-2013
Pinout of the DIN connector.
Pin 1 – Purple
Pin 2 – Green – Right
Pin 3 – Black – Up
Pin 4 – White – Vin
Pin 5 – Blue – Down
Pin 6 – Yellow – Left
Pin 7 – Red – Ground
Step 1: Prepare the Wires
There are several ways to connect the wires to the Arduino. I cut the controller and cut off the ends of the wires and solder jumpers to it. Note: It's better to cover the exposed soldered connections to prevent the wires from touching.
Step 2: Connect the WiiChuck Adapter, Power and Ground Wires
The WiiChuck adapter makes it easy to connect the Nunchuck to the Arduino. Here's the one I'm using.
Connect the white wire to vin and red wire to ground.
White – Vin
Red -Ground
Pin 1 – Purple
Pin 2 – Green – Right
Pin 3 – Black – Up
Pin 4 – White – Vin
Pin 5 – Blue – Down
Pin 6 – Yellow – Left
Pin 7 – Red – Ground
Step 1: Prepare the Wires
There are several ways to connect the wires to the Arduino. I cut the controller and cut off the ends of the wires and solder jumpers to it. Note: It's better to cover the exposed soldered connections to prevent the wires from touching.
Step 2: Connect the WiiChuck Adapter, Power and Ground Wires
The WiiChuck adapter makes it easy to connect the Nunchuck to the Arduino. Here's the one I'm using.
Connect the white wire to vin and red wire to ground.
White – Vin
Red -Ground
Step 3: Connect the Blue, Black, Green, and Yellow Wires
Note: The purple wire is not used.
Netgear Mp101 Hack Tool
Blue – Pin 9
Black -Pin 10
Green – Pin 3
Yellow – Pin 11
Netgear Mp101 Hacks
Bescor MP-101 Hack Part 2
